About Me

My photo
Raleigh, NC
Born in Richmond, Virginia, grew up in Kernersville, North Carolina, and now reside in Raleigh. I attribute most of my fishing prowess to my father, who took me fishing often as a child. We would regularly do float trips on the James River in Virginia, which is where I learned to love canoeing and river fishing. Unfortunately, my father has passed, but he lives on through my passion for chasing fish from my canoes. I intend to pass this love for fishing and the outdoors onto my children and can't wait to share these experiences with them. I currently have 4 canoes: Customized Old Town Guide 119, Customized Mohawk 16 Royalex, Coleman Scanoe, and 12' Indian River Solo.

Saturday, October 19, 2013

River with Many Bends

My family has been driving up to the Frederick, MD area for the last 8 years to visit with my wife's family.  Over the last few, I've started taking fishing tackle and canoes to explore the areas rivers and creeks.  With healthy populations of smallmouth, it reminds me of my childhood trips on the James river with my father, while visiting his in-laws.  My son isn't quite ready for these flows, but within a few years, I'll be taking my best fishing bud along during these trips.

The Potomac river runs in a southerly direction from Harper's Ferry just west of Frederick with several nice tributaries just to the east, even closer to Frederick.  One of the largest tributaries, the Monocacy, has proven to be a great river for both fishing and scenery.  With headwaters originating in Gettysburg, PA, just ~40 miles to the north, I classify the Monocacy as a "medium flow".  However, it can often surge to ~20,000 cfs in periods of heavy rain!  Normal summer/fall lows are near 150-300 cfs, making for slow-to-medium paced floats and minimal portages or dragging. 

The name Monocacy originates from an indian name for "river with many bends".  This flow cuts through rolling hills of farmland with small mountains in the distance.  The lower sections of the river are peppered with rock outcroppings and various hardwoods.  The bottom is a mix of granite boulders and sandy river pebble bottom.  Despite the infrequent developed land near the banks and urban settings nearby, wildlife is plentiful, and humans are not.  I often see no one on these floats, something I cherish in a canoe outing. 

Access is very good.  A managed paddle trail extends some 40 miles above the confluence with the Potomac with boat ramps and established canoe launches along the way.  See more here -->  http://md-frederickcounty.civicplus.com/documents/7/229/Monocacy%20River%20Water%20Trail%20Map%20%20Guide.pdf

Smallmouth fishing is good, not exceptional.  Depending on conditions, my numbers are decent, typically averaging 2-4 fish every hour.  I've caught a few good sized fish (14+") in this flow, but nothing like the warmer, larger, and more fertile foothills flows of NC or SC.  One big plus is that the state of Maryland manages the Monocacy as a catch and release fishery for black bass year round from Buckeystown dam down to the Potomac.  I usually fish the lower stretches, but want to explore further upstream.  I've read there are musky in this flow, a fish I've yet to catch.

This weekend we're on our annual fall trip to the area, visiting with family and catching a fall festival with the kids.  Weather has been overcast and upper 60s.  Leaves are turning and dropping.  Colder weather is moving in with nights in the low 40s. 

Yesterday I floated from MD 80 to Mouth of Monocacy (access points 16 and 20 on the map, almost 10 miles).  River flow was just under 500 cfs, which is about twice my preference.  The river hit flood stage about 1 week prior and has just settled down to a reasonable fishable flow.  Water conditions were murky (stained) for this flow, with visibility around 2-2.5'.  Water temps were 62-64 deg F.

I launched at 8:30 am and reached my takeout at 3:45 pm, even with an upstream breeze most of the day and a few brief stops to stretch and/or fish a particular area.

On this trip, the smallmouth were only caught in areas of swift water.  They were scattered and active, yet very hesitant.  Over the course of the day, I tried many lures to zero in on their preferences.  In the end, a jerk-pause presentation of the rapala x-rap in a orange/black color caught the most fish.  I also landed fish on the following: torpedo, rebel craw, fluke jr, white curly tail, yellow curly tail, black spinnerbait, cordell spot.  Often, I'd see the fish chasing the lure and turning away near the boat.  The x-rap seemed to entice the bite more than any other. 

No big smallmouth on this trip.  The surprise today was hooking and landing the biggest creek chub I've ever caught.  Normally, they are good fighters, but this one was a slouch.  I saw lots of wildlife on this trip, including: a pair of female turkeys, muskrat, a large buck (8 or 10 pointer), a few does like the one pictured, probably 50 wood ducks, herons, and a hawk that was munching on a large red tailed squirrel up in a sycamore overhanging the river. 





This was a very relaxing trip and a great way to spend a vacation day.  Folks reading this may think I'm trying to avoid my mother-in-law, but I assure you that's not the case.  She's happy to entertain the kiddos with my wife, while I spend time alone on the water.  Plus, there's always a good meal waiting when I return.  Can't beat that!

Wednesday, October 16, 2013

Mohawk 16 - Rod Stage & Holders

I had some scrap cedar leftover from a planter project a few years ago.  I've been saving the pieces specifically for this type of thing.  Along with the cedar, I had some 1-1/4" PVC in the garage as well, which is a great fit for the rod butts when making holders. 

I stacked, glued, and screwed the scrap cedar and drilled/coped a spot for the PVC to mount.  I notched the mount area to angle the PVC outboard a bit.  This should help with trolling by keeping the lines off the rear of the canoe yet not interfere with paddling (similar to a kayak flush mount). With a good sanding, coat of poly, and a few wood screws; these puppies are good to go!





The front thwart is also scrap cedar.  The RAM mount holders were a Christmas gift from last year. 
Again, a good sanding, coat of poly, and a few screws later ... I have an area to stage rods and two holders up front. 





Technically, I could troll 4 rods at the same time, but that gets a little messy when landing a decent fish or turning around to deal with a snag.

All the parts and fasteners were laying around, so this little project involved no trips to the hardware store and no cost, other than my time.

Next up is a simple anchor setup.  Stay tuned ...